Low noise pre-amplifier for 144 MHz

There is nothing much revelatory on this. It is a simple and standard design using BF998.
The signal path is bypassed by two CX-120P relays for TX. It easily survived about 400W in long-running contest.

The amplifier itself. There is the input tuned coil in the left section. BF998 and the second tuned coil is in the right section.

Two CX-120P relays for by-passing the aplifier on TX.

Both parts are mounted the splash-proof plastics box. SO239 on the left is the output (towards TCVR or PA). SO239 on the right is the input (towards ANT).

Schematics

< Other Projects

<< Main Page (OK1FIG)